These beads caps are handmade, handstamped, shaped and finished by by me in my studio.
They are made with 24 gauge Niobium sheet.
This is for 1 pair or 2 bead caps as shown in the picture.

They are made by an anodizing process which creates an oxidized layer of color depending on the voltage used in the anodizing bath.  This color is a pale blue, sort of a steel blue.

The dimensions were measured with my digital calipers and are as follows:

Diameter ~ 14.87 mm
Hole size ~ 3.38 mm

These holes will fit the 3/32" tubing.  I buy my silver tubing at Rio Grande.  I know outside diameters vary a bit so please check to ensure your tubing will fit.

The niumium is difficult to photograph.  Each bead cap was processed at the same time and are the same colors.  Niobium had a sort of "colorshift" to it, so some of the pictures may look like the caps are different shades when they are not.

**The extra image shows how you can use these bead caps on your beads. These beads are not included.**

Please let me know if you have any questions.

Thank you!
Kristi

These beads caps are handcut, shaped and finished by by me in my studio.
They are made with 24 gauge Niobium sheet.
This is for 1 pair or 2 bead caps as shown in the picture.

They are made by an anodizing process which creates an oxidized layer of color depending on the voltage used in the anodizing bath.  This color is pinkish purple.

The dimensions were measured with my digital calipers and are as follows:

Diameter ~ 11.62 mm
Hole size ~ 3.40 mm

These holes will fit the 3/32" tubing.  I buy my silver tubing at Rio Grande.  I know outside diameters vary a bit so please check to ensure your tubing will fit.

The niumium is difficult to photograph.  Each bead cap was processed at the same time and are the same colors.  Niobium had a sort of "colorshift" to it, so some of the pictures may look like the caps are different shades when they are not.

**The extra image shows how you can use these bead caps on your beads. These beads are not included.**

Please let me know if you have any questions.

Thank you!
Kristi

These beads caps are handmade, handstamped, shaped and finished by by me in my studio.
They are made with 22 gauge sterling silver sheet.
This is for 1 pair or 2 bead caps as shown in the picture.

They are stamped with Fleur de Lis and scrolls then "antiqued" to bring out the design. Then they are tumbled to nice shine. The perfect accent for your beads when used with silver or copper tubing and cored to the bead.

The dimensions were measured with my digital calipers and are as follows:

Diameter ~ 15.29 mm
Hole size ~ 5.25 mm

If coring the beads with silver tubing, the tubing size for Pandora beads fits this cap perfectly. The larger hole will allow larger beads to be strung easily on silver chains, silk ribbons, etc. Pandora tubing has an OD (outside diameter) of 5.08 mm and these will not fit as far as I know.  Tubing that fits Troll beads has an OD of approx. 4.80.  These caps will work, but you will need to adjust your tubing "lip" accordingly.

**The extra image shows how you can use these bead caps on your beads. These beads are not included.**

Please let me know if you have any questions.

Thank you!
Kristi